Test test
Lightning Dissipation Spurs
The Lightning Spur is a very efficient hybrid lightning dissipater. When operating as a shield it reduces the potential between the tower and storm cell by transferring electrical charge to the adjacent ionizing air molecules. This transference represents dissipation or the controlled leakage of the charge, thus reducing the probability of a lightning strike.
A Lightning Dissipation System, with the Economy of a Lightning Rod
Lightning is the leading cause of weather-related damage to broadcast equipment. With average lightning currents of 20 to 30 kiloamps and heat energy in excess of 20,000°C, the need for improved lightning protection is evident.
If the electric charge accumulation rate far exceeds the dissipation rate the Lightning Spur will divert a lightning strike away from the protected equipment and toward a safe, predetermined path to earth.
Lightning strikes can cause various types of damage. Large peak voltages damage transmission lines and voltage sensitive devices. Lightning’s electrical currents often result in an energy transfer and heat. The heat energy can literally melt electrically conductive components including transmitting antennas.
Sudden increase in temperature of non-conductive materials can result in significant structural damage. Lightning damage to the guy wire insulator or to the concrete guy wire anchor could result in tower failure. The addition of ERI Lightning Spurs offers increased protection for antennas and towers.
Purpose
- Shields structure by reducing the electric potential of the tower or structure.
- Divert the electrostatic energy away from critical equipment and toward a safe path to earth.
- Divert the electrostatic
Features and Benefits
- Exceptional electrical dissipation characteristics
- No antenna and beacon interference
- 180 mph survival wind speed
- Low cost, replaceable dissipating tips
Standard Lightning Dissipation Spur Kits
- Part NumberDescription
- LRK0004-A3Top mount or mid-level mount, six (6) spurs. LRK0004-A3 kits mount to 1-1/8-inch to 5-inch (29 to 127 mm) diameter vertical members. Mounting brackets and hardware are included. Use for top of tower leg mount when tower face size is larger than beacon plate diameter or any mid-level tower mount. Universal mounting bracket for vertical round members from 1-1/8-inches to 5-inches (29 to 127 mm) in diameter included.
- LRK0004-A1Mid-level mount, single antenna mount, two (2) spurs. LRK0004-A1 kits mount to 1-1/8-inch to 5-inch (29 to 127 mm) diameter vertical members. Mounting brackets and hardware are included. Use for top of tower leg mount when tower face size is larger than beacon plate diameter or any mid-level tower mount. Universal mounting bracket for vertical round members from 1-1/8-inches to 5-inches (29 to 127 mm) in diameter included.
- LRK0008-A3Top mount or mid-level mount, six (6) spurs. LRK0008-A3 kits mount to 4-3/4-inch to 7-1/2-inch (121 to 191 mm) diameter vertical members. Mounting brackets and hardware are included. Use for top of tower leg mount when tower face size is larger than beacon plate diameter or any mid-level tower mount. Universal mounting bracket for vertical round members from 4-3/4-inches to 7-1/2-inches (121 to 191 mm) in diameter included.
- LRK0008-A1Mid-level mount, single antenna mount, two (2) spurs. LRK0008-A1 kits mount to 4-3/4-inch to 7-1/2-inch (121 to 191 mm) diameter vertical members. Mounting brackets and hardware are included. Use for top of tower leg mount when tower face size is larger than beacon plate diameter or any mid-level tower mount. Universal mounting bracket for vertical round members from 4-3/4-inches to 7-1/2-inches (121 to 191 mm) in diameter included.
- LRK0005-C2Top mount, four (4) spurs. "C" kits mount to any beacon plate with 11/16-inch (17 mm) or larger diameter bolt holes and will not interfere with beacon mounting or operation. Extended 5/8-inch bolt set and brackets are furnished. Use when the tower face is smaller than the beacon plate diameter or for monopoles with a beacon plate.
- LRK0005-C1Top mount, two (2) spurs. "C" kits mount to any beacon plate with 11/16-inch (17 mm) or larger diameter bolt holes and will not interfere with beacon mounting or operation. Extended 5/8-inch bolt set and brackets are furnished. Use when the tower face is smaller than the beacon plate diameter or for monopoles with a beacon plate.LRK000A-HW-3
- LRK000A-HW-3Top mount or mid-level mount, six (6) spurs. LRK000A-HW kits mount to 1-inch to 3-inch (25 to 76 mm) horizontal members. Mounting brackets and hardware are included. Use for face mounts on large face towers in addition to the LRK0007-A3 or LRK0008-A3 leg mount unit.
- LRK000A-HW-2Top mount or mid-level mount, four (4) spurs. LRK000A-HW kits mount to 1-inch to 3-inch (25 to 76 mm) horizontal members. Mounting brackets and hardware are included. Use for face mounts on large face towers in addition to the LRK0007-A3 or LRK0008-A3 leg mount unit.
- A-H-3Top mount or mid-level mount, six (6) spurs. "A-H" series kits mount to 1/4-inch to 7/8-inch (6 to 22 mm) horizontal or diagonal members. Mounting brackets and hardware are included. Two (2), 1-1/2-inch x 1.75-inch (38 mm x 44 mm) U-bolts are furnished with each kit. Use for face mounts on large face towers in addition to the LRK0004-A3 or LRK0008-A3 leg mount unit.
- A-H-1Mid-level mount, single antenna mount, two (2) spurs. “A-H" series kits mount to 1/4-inch to 7/8-inch (6 to 22 mm) horizontal or diagonal members. Mounting brackets and hardware are included. Two (2), 1-1/2-inch x 1.75-inch (38 mm x 44 mm) U-bolts are furnished with each kit. Use for face mounts on large face towers in addition to the LRK0004-A3 or LRK0008-A3 leg mount unit.
- A-J-3Top mount or mid-level mount, six (6) spurs. "A-J" kits mount to 5-inch (127 mm) or larger vertical members using chain and J-bolts. Specify member diameter for proper fit. Use for monopoles which do not have a top beacon plate or top flange plate or any large tower legs which are greater than 5-inches in diameter.
- A-J-1Mid-level mount, single antenna mount, two (2) spurs. "A-J" kits mount to 5-inch (127 mm) or larger vertical members using chain and J-bolts. Specify member diameter for proper fit. Use for monopoles which do not have a top beacon plate or top flange plate or any large tower legs which are greater than 5-inches in diameter.
Accessories
- Part NumberDescription
- LRK0006Lightning Dissipation Spur replacement blades: A1 or C1 requires two (2) kits. C2 requires four (4) kits. A3 requires six kits.
- LRK0007-KITReplacement hardware kit for one (1) Lightning Spur. Includes 4 each NU1011GA 5/8-inch 11 galvanized nuts, 4 each WF10GA 5/8-inch galvanized flat washers, 2 each WL10GA 5/8-inch galvanized lock washers, and 2 each WF12GA 3/4-inch galvanized flat washers.
Lightning Dissipation Spur Product Brochure
Lightning Dissipation Spur Installation Instructions