Chandler, Indiana – September 29, 2017 – Electronics Research, Inc. has promoted Dave Benco to the position of Vice President, US Sales. He will have responsibility of leading ERI’s US Sales for television and radio antenna, transmission line, and filter products in the United States. In making the announcement Kenny Brown, ERI’s Chief Operating Officer, commented “Dave has demonstrated that he is the right person to lead ERI’s Sales Team. He has a deep understanding of the broadcast market, has established relationships with key customers, and has the knowledge and experience needed to maximize the growth opportunities presented by the FCC Repack of the broadcast television band.”

Benco has over 20 years of experience in terrestrial broadcasting including not only UHF and VHF television, mobile television and distributed transmission systems, but also FM radio, 2.5 GHz MMDS systems and wireless broadband applications. He was an active participant in the ATSC activities surrounding ATSC Mobile DTV. He has been a member of IEEE BTS, AFCCE and has presented at multiple technical conferences and meetings.

Previously Dave served as ERI’s Director of Television Sales. He has also held positions as Strategic Accounts Manager at GatesAir, National Key Account Manager at Rohde & Schwarz and Director of Sales at Axcera. He has also held technical sales positions with Westinghouse Electric Corporation and Indus International. He holds a Bachelor of Science degree in Electrical Engineering from Penn State University and a Master of Business Administration from Waynesburg College.

Dave can be reached by telephone at +1 (724) 470-4440 or by email at dbenco@eriinc.com.

About Electronics Research, Inc.

Electronics Research, Inc. is a company focused on serving the needs of the terrestrial radio and television broadcasters with antennas, transmission line, RF components, and structural products. The company is focused on providing high quality and sophisticated engineering solutions to customer problems. For more than 75 years, ERI has served the broadcast industry with products and services of the highest quality and dependability.

For More Information Contact:

Bill Harland
Electronics Research, Inc.
Tel: (812) 925-6000×214
Fax: (812) 925-4030
bharland@eriinc.com
Online: www.eriinc.com

Chandler, Indiana – April 18, 2017 – Electronics Research, Inc. will introduce a new high power UHF DTV Mask Filter at the upcoming NABSHOW 2017 in Las Vegas, Nevada at the Las Vegas Convention Center, April 24 to 27.

The UF35000 is an innovative tunable, high efficiency, waveguide UHF band pass filter. The power handling capability is 25 kW average power with convection cooling. Power handling is increased to 35 kW average power with the addition of forced air cooling and increases to 50 kW for the liquid cooled version. The filter is tunable and exceptionally efficient. The filter is constructed of lightweight silver plated aluminum. The design incorporates a unique system that allows the size of the individual cavities within the filter to be precisely adjusted to achieve resonance. This unique approach simplifies the filter construction, promotes reliability, and contributes to the low insertion loss.

In addition to the unique cavity construction all UF Series band pass filters include multiple cross couplings are provided to increase rejection of transmitter out of band emissions. Six and eight pole designs are available for 8-VSB, ISDB-T and other COFDM applications. Input and output connections are 3-1/8 inch, 4-1/16 inch or 6-1/8 inch, 50 ohm, flanged or unflanged.

ERI can provide the UF35000 as a part of a complete RF system. ERI manufactures a broad array of accessory products including directional couplers, coaxial patch panels, motorized coaxial and waveguide switches, liquid cooled RF loads, adjustable fine matchers and low pass filters. These accessory components can be assembled into systems that include support frames suitable for floor or ceiling mounted applications.

Visit ERI in booth number C2030 at the NABSHOW in Las Vegas April 24 to 27. For more information contact ERI at sales@eriinc.com or by telephone +1 (812) 925-6000.

About Electronics Research, Inc.

For more than 70 years, ERI has served the broadcast industry with products and services of the highest quality and dependability. Our dedicated staff of engineers, drafters, fabricators, project managers, and installers deliver products to meet all of your broadcast transmission needs, both RF and structural. We take pride in contributing to your success by offering the best broadcast antennas, filters and combiners, transmission line, and towers.

For More Information Contact:

Bill Harland
Electronics Research, Inc.
Tel: (812) 925-6000×214
E-mail: bharland@eriinc.com
Online: www.eriinc.com

Chandler, Indiana – April 18, 2017 – Electronics Research, Inc. will introduce a new medium and high power FM hybrid couplers at the upcoming NABSHOW 2017 in Las Vegas, Nevada at the Las Vegas Convention Center, April 24 to 27.

The new HY0241 and HY0244 are 3 dB, 90-degree FM Hybrid Couplers for combining the power of two or more FM transmitters. The Hybrid has a “cross-over” configuration and is also used in ERI’s constant impedance FM combiner systems and FM switched and switchless combiners.

The HY0241 is designed for Medium and High Power Applications and is available in configurations that included any combination of 3-1/8-inch, 4-1/16-inch and 6-1/8-inch Marman, Flanged, or Unflanged connections. The HY0244 is designed for Very High Power requirements and has models available with port connections from 3-1/8-inch through 9-3/16-inch.

Both models of hybrid have been carefully design to eliminate sharp edges and corners to maximize power and voltage handling capability. These hybrid designs are ideal for multi-station FM combining systems that include elevated digital power levels.

Visit ERI in booth number C2030 at the NABSHOW in Las Vegas April 24 to 27. For more information contact ERI at sales@eriinc.com or by telephone +1 (812) 925-6000.

About Electronics Research, Inc.

For more than 70 years, ERI has served the broadcast industry with products and services of the highest quality and dependability. Our dedicated staff of engineers, drafters, fabricators, project managers, and installers deliver products to meet all of your broadcast transmission needs, both RF and structural. We take pride in contributing to your success by offering the best broadcast antennas, filters and combiners, transmission line, and towers.

For More Information Contact:

Bill Harland
Electronics Research, Inc.
Tel: (812) 925-6000×214
E-mail: bharland@eriinc.com
Online: www.eriinc.com

Chandler, Indiana – April 18, 2017 – Electronics Research, Inc. will introduce new low and medium AXIOM Master FM Antennas at the upcoming NABSHOW 2017 in Las Vegas, Nevada at the Las Vegas Convention Center, April 24 to 27.

ERI’s broadband side mounted AXIOM Master FM Antenna family has been expanded with two models for lower power applications. The LPA and MPA Series AXIOM Master FM Antennas are rated for a combined input power of 15 kW and 39 kW respectively. These are simple side mounted FM antenna based on ERI’s proprietary and field proven ROTOTILLER® FM antenna element. ERI offers 4, 8, 12, and 16-bay versions of the LPA and MPA Series AXIOM™ master FM antennas. The AXIOM is a specially designed antenna system which provides high input power handling capability and can provide service as an auxiliary master FM antenna for systems that are limited to a band width requirement of up to 18 MHz of the FM Band (88 MHz to 108 MHz). The antenna can be designed with a single RF input or can be configured as separate upper and lower antennas for higher power handling capability and redundancy.

Visit ERI in booth number C2030 at the NABSHOW in Las Vegas April 24 to 27. For more information contact ERI at sales@eriinc.com or by telephone +1 (812) 925-6000.

About Electronics Research, Inc.

For more than 70 years, ERI has served the broadcast industry with products and services of the highest quality and dependability. Our dedicated staff of engineers, drafters, fabricators, project managers, and installers deliver products to meet all of your broadcast transmission needs, both RF and structural. We take pride in contributing to your success by offering the best broadcast antennas, filters and combiners, transmission line, and towers.

For More Information Contact:

Bill Harland
Electronics Research, Inc.
Tel: (812) 925-6000×214
E-mail: bharland@eriinc.com
Online: www.eriinc.com

Chandler, Indiana – April 17, 2017 – Electronics Research, Inc. is pleased to announce that James Ruedlinger has rejoined ERI in the newly created position of Senior Vice President, Engineering. He will have responsibility for managing both of ERI’s RF and Structural Engineering Groups.

James is a registered professional engineer with over 17 years of experience in the telecommunications industry including serving almost 15 years previously with Electronics Research, Inc. (ERI), from 2000 through 2014. James has spent the past two years working for Crown Castle as an Engineering Manager with their corporate engineering and construction engineering departments. James has been involved with multiple facets of engineering including new broadcast tower design and construction, complex structural reinforcements, development of engineered rigging plans, and engineering oversight for large broadcast antenna installations as well as extensive design and analysis experience of large and small gin poles. James also has over 15 years of climbing and tower inspection experience, and has been actively involved with the TIA committee in developing construction and gin pole design standards since the inception of the ANSI/TIA-1019 standard. James currently serves as the chair of the TR14 task group responsible for the ANSI/TIA-322 engineering standard on Loading, Analysis, and Design Criteria Related to the Installation, Alteration and Maintenance of Communication Structures.

Kenny Brown, ERI’s Chief Operating Officer, stated “The timing is perfect for James’ return to ERI and he will strengthen the company’s already expanded manufacturing and engineering capacity ahead FCC Repack of the television broadcast band. James, mentored by Tom Silliman, [ERI’s president and CEO], will help lead our engineering group and the company well into the future. ERI’s commitment to the broadcast industry today should serve as notice that we’ve been here for a long time and we expect to continue to serve broadcasters for many years to come.”

About Electronics Research, Inc.

For more than 70 years, ERI has served the broadcast industry with products and services of the highest quality and dependability. Our dedicated staff of engineers, drafters, fabricators, project managers, and installers deliver products to meet all of your broadcast transmission needs, both RF and structural. We take pride in contributing to your success by offering the best broadcast antennas, filters and combiners, transmission line, and towers.

For More Information Contact:

Bill Harland
Electronics Research, Inc.
Tel: (812) 925-6000×214
E-mail: bharland@eriinc.com
Online: www.eriinc.com

Chandler, Indiana – April 18, 2017 – Joe Meleski, Vice President of Domestic Sales, Electronics Research, Inc. (ERI) announces the appointment of Shawn Knotts as Western Region, Television Account Manager. He will have responsibility for the sale of ERI’s television antennas, towers, transmission line systems, television filter systems and RF components. He will serve the Western Region of the United States.

Shawn has been with ERI for over 14 years and was previously the Western Region Radio Account Manager. Prior to that, Shawn was the Senior Project Engineering Manager through the digital television build out in. Joe Meleski commented that, “Shawn has been involved in some of the largest and most complex broadcast projects in the US. His experience and knowledge of ERI products and services will be essential to his new position for the television market.”

Knotts graduated from the University of Southern Indiana with a Bachelor of Science degree in Electrical Engineering Technology. Prior to joining ERI, Shawn held project management and product engineering positions at TMI Mechanical Contractors, TRW Automotive Electronics, and Universal Tower, Inc.
Shawn can be contacted by telephone at +1 (812) 760-5581 or by e-mail at sknotts@eriinc.com.

About Electronics Research, Inc.

For more than 70 years, ERI has served the broadcast industry with products and services of the highest quality and dependability. Our dedicated staff of engineers, drafters, fabricators, project managers, and installers deliver products to meet all of your broadcast transmission needs, both RF and structural. We take pride in contributing to your success by offering the best broadcast antennas, filters and combiners, transmission line, and towers.

For More Information Contact:

Bill Harland
Electronics Research, Inc.
Tel: (812) 925-6000×214
E-mail: bharland@eriinc.com
Online: www.eriinc.com

Chandler, IN USA